Pipeclamp Miscellaneous

Refine your results
19 products found
  • Grid view
  • List view
  • Large grid view
133 plastic stop end cap

133 Plastic Stop End Cap Key Clamp

A plastic stop end for use in the end of tubes. This stop end can be used in either medium or heavy gauge tube. This is only a friction fit and for a more permanent fix an adhesive is recommended.

  • From £0.18 Ex VAT
300 Grub Screws

300 Grub Screws

Electro plated case hardened grubscrews. These grubscrews are supplied pre fitted into the fittings.

  • From £0.47 Ex VAT
170 Single Mesh Clip

170 Single Mesh Clip Key Clamp

Single location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt. This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.

  • From £0.85 Ex VAT
179 Locking Collar

179 Locking Collar Key Clamp

A locking collar used as extra support for a Pipeclamp fitting on structures where the slip load on the grubscrew may be exceeded i.e. racking. Can also be used to support a Key Clamp fitting that is required to be left undone. i.e. a gate hinge.

  • From £1.22 Ex VAT
171 Double Mesh Clip

171 Double Mesh Clip Key Clamp

Double location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt. This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.

  • From £1.29 Ex VAT
184 Metal Stop End Cap

184 Metal Stop End Cap Key Clamp

This Key Clamp fitting is a metal stop end cap for sealing the open ends of tubes. This Key Clamp fitting can be used only be used on medium (3.2) weight tube. This Key Clamp fitting is a drive in fit that is difficult to remove without the need for adhesive. For a plastic alternative use the Pipeclamp fitting 133.

  • From £1.44 Ex VAT
301 Allen Key

AKS / AKL Allen Key

Hexagonal key. The allen key is the only tool required to tighten up a Pipeclamp fitting. The use of the dual ratchet Pipeclamp reference 302 is recommended to achieve the required torque.

  • From £1.50 Ex VAT
182 Hook

182 Hook Key Clamp

Chain hook. Used to locate chains across openings. Not ideal for permanent chain location. Recommended that one end of the chain is fixed using a Key Clamp fitting reference 173M and held in place with a nut and bolt.

  • From £1.66 Ex VAT
Buy More Save
M12 x 100 Ankerbolts (Thunderbolts) x 2

Ankerbolts M12 x 60 Galvanised (Thunderbolts) x 2

M12 x 60 Galvanised Ankerbolts (Thunderbolts). Suitable for fixing down handrail base plate fittings such as for 132, 144, 145, 232, 246, 247 & 251 (not for sizes 26.9mm/60.3mm). Sold in pairs.

  • £1.76 Ex VAT
Buy More Save
M12 x 100 Galvanised Through Bolts x 2

M12 x 100 Galvanised Through Bolts x 2

M12 x 100 Galvanised Through Bolts. Suitable for fixing down handrail base plate fittings such as for 132, 144, 145, 232, 246, 247 & 251 (not for sizes 26.9mm/60.3mm). Sold in pairs.

  • £1.82 Ex VAT
Buy More Save
M12 x 100 Ankerbolts (Thunderbolts) x 2

Ankerbolts M12 x 75 Galvanised (Thunderbolts) x 2

M12 x 75 Galvanised Ankerbolts (Thunderbolts). Suitable for fixing down handrail base plate fittings such as for 132, 144, 145, 232, 246, 247 & 251 (not for sizes 26.9mm/60.3mm). Sold in pairs.

  • £1.82 Ex VAT
Buy More Save
M12 x 100 Ankerbolts (Thunderbolts) x 2

Ankerbolts M12 x 100 Galvanised (Thunderbolts) x 2

M12 x 100 Galvanised Ankerbolts (Thunderbolts). Suitable for fixing down handrail base plate fittings such as for 132, 144, 145, 232, 246, 247 & 251 (not for sizes 26.9mm/60.3mm). Sold in pairs.

  • £1.95 Ex VAT
Buy More Save
M16 x 100 Galvanised Through Bolts x 2

M16 x 100 Galvanised Through Bolts x 2

M16 x 100 Galvanised Through Bolts. Suitable for fixing down handrail tubular standards and also 132 pipeclamp base plate fittings in size 5 (60.3mm). Sold in pairs.

  • £1.95 Ex VAT
138 Gate Eye

138 Gate Eye Key Clamp

Female section of a 2 part gate hinge. Used in conjunction with Key Clamp fitting reference 140.

  • From £2.22 Ex VAT
199 Single Lugged Bracket

199 Single Lugged Bracket

Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.

  • From £2.46 Ex VAT
140 Gate Hinge

140 Gate Hinge Key Clamp

Male section of a 2 part gate hinge. Used in conjunction with Key Clamp fitting reference 138.

  • From £2.65 Ex VAT
198 Double Lugged Bracket

198 Double Lugged Bracket

Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The tube cannot be joined within the fitting.

  • From £3.82 Ex VAT
390 Silver Zinc Galvanising Spray

Silver Zinc Galvanising Spray 400ml

Aerosol paint which does not require a separate primer. Can be used as an excellent touch-up paint on damaged surfaces or for the protection of cut tube ends.

  • £9.75 Ex VAT
302 Dual Ratchet

302 Dual Ratchet

Dual sized ratchet key. The ratchet has two removable hexagon socket heads to enable the complete range of Pipeclamp fitting to be tightened. The use of the ratchet enables the grubscrews to be tightened to the correct torque.

  • £37.80 Ex VAT
Close

1 item(s) added to your compare list