Pipeclamp Multiple Joints

Refine your results
13 products found
  • Grid view
  • List view
  • Large grid view
160 Retro Fit Clamp On Tee

160 Retro Fit Clamp On Tee Key Clamp

Offset add on tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.

  • From £1.87 Ex VAT
161 Offset 90deg. Crossover

161 Offset 90degree Crossover Key Clamp

A 90° offset crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail. Where dimension ‘D’ indicates two figures, the first figure refers to tube ‘A’, second refers to tube ‘B’.

  • £2.11 Ex VAT
116 3way Through

116 3 Way Through Key Clamp

Key Clamp fitting typical use is on straight and level guardrail for connecting the mid/lower rail to the vertical at a 90 corner. Can also be used in a similar way on other rectangular structures (Kee Klamp compatible 21).

  • From £2.26 Ex VAT
165 Combination Socket

165 Combination Socket

A combination fitting designed for use in the construction of racking systems. The fitting enables the connection of a vertical upright at 90° to 2 horizontal rails, 1 being the tie rail, the other being the load rail. On pallet racking the upright normally has the load rail on the inside, whilst for shelved racking the upright normally has the load rail on the outside.

  • From £2.37 Ex VAT
Buy More Save
119 Two Socket Cross

119 Two Socket Cross Key Clamp

A Key Clamp 90 joint between a vertical and two horizontals. Typical use on straight and level guardrail to connect the mid/lower rails to the upright (Kee Klamp compatible 26). The vertical must remain continuous with cross rails cut. Normally used in conjunction with the Key Clamp fitting 104 Long Tee.

  • From £2.42 Ex VAT
128 3way 90 degree Elbow

128 3way 90 degree Elbow Key clamp

A 3 way enclosed 90 corner joint. Typical use is on straight and level guardrail at a 90 corner where an upright is in position. This Key Klamp fitting can also be used to create enclosed corner joints in other square structures such as benches etc.

  • From £2.80 Ex VAT
176 3way Outlet Tee

176 3way Outlet Tee Key Clamp

3 way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames.

  • From £2.94 Ex VAT
219 Slope Range Socket Cross

219 Slope Range Socket Cross Key Clamp

An adjustable cross for connecting tubes between mid/lower rails and the vertical on ramps or shallow gradients. The vertical must remain continuous with the cross rails being cut.

  • From £3.80 Ex VAT
158 4way Cross

158 4 way Cross Key Clamp

A 4 way cross that enables the vertical to pass through the centre of the fitting with the 4 horizontal tubes joining at 90° to each other. Ideal for structures with multiple verticals. The vertical must remain continuous with the cross rails being cut.

  • From £4.08 Ex VAT
161U Retro Fit Crossover

161U Retro Fit Offset 90degree Crossover

A retro fit 90° offset crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail. Where dimension ‘D’ indicates two figures, the first figure refers to tube ‘A’, second refers to tube ‘B’.

  • £4.30 Ex VAT
256 Slope (11°- 29°) Socket Cross Key Clamp

256 Slope (11°- 29°) Socket Cross Key Clamp

An adjustable cross for connecting tubes between mid/lower rails and the vertical staircases (11°- 29°) and larger gradients. The vertical must remain continuous with the cross rails being cut.

  • £6.90 Ex VAT
191 Ridge Fitting

191 Ridge Fitting Key Clamp

Usually used to form roof structures in conjunction with type 185, with an angle of 27½°. The ridge tube running longitudinally with the roof may be joined within the fitting (there are two setscrews acting on this tube, which are obscured in the photo).

  • £8.60 Ex VAT
185 Eaves Fitting

185 Eaves Fitting Key Clamp

Usually used to form roof structures in conjunction with type 191, with an angle of 27½°. The horizontal eaves tube running longitudinally with the roof may be joined within the fitting (there are two setscrews acting on this tube, which are obscured in the photo).

  • £10.37 Ex VAT
Close

1 item(s) added to your compare list