Pipeclamp Tee's

Refine your results
13 products found
  • Grid view
  • List view
  • Large grid view
101 Short Tee

101 Short Tee Key Clamp

A 90 deg. tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail or end/mid rail to the vertical (Kee Klamp compatible 10). This Key Clamp fitting cannot be used to join tubes in the top of the short tee. For this the Key Clamp fitting 104 Long Tee should be used.

  • From £1.52 Ex VAT
160 Retro Fit Clamp On Tee

160 Retro Fit Clamp On Tee Key Clamp

Offset add on tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.

  • From £1.87 Ex VAT
148 Short Swivel Inline Tee

148 Short Swivel Inline Tee Key Clamp

shown, priced and sold as a single fitting but normally used in pairs to create angles between 85° and 235°. A central tube is required to join the (Key Clamp) fittings together to create the angle. When working out the correct tube length dimension ‘C’ should be subtracted.

  • From £2.33 Ex VAT
147 Offset Swivel Tee

147 Offset Swivel Tee Key Clamp

An internal swivel tee used in conjunction with other Key Clamp fittings in the range to create a 360° swivel joint. Ideal use on handrail or offset guardrailing down variable angled slopes. Eliminates the requirement for specialised angle fittings.

  • From £2.48 Ex VAT
129 Adjustable Tee

129 Adjustable Tee Key Clamp

Freely adjustable tee between 30° and 60°. Typical use is a tee connection on angled top rails on steeper slopes or stairs with the upright remaining vertical. This fitting can also be used for bracing on structures. This fitting has no ability to join tubes. An alternative for this situation is the Key Clamp fitting 127.

  • From £2.58 Ex VAT
Buy More Save
104 Long Tee

104 Long Tee Key Clamp

A 90 deg. tee connection between 2 tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail. This Key Clamp fitting can be used to join tubes in the top of the twin grubscrew long tee (Kee Klamp compatible 25).

  • From £2.83 Ex VAT
176 3way Outlet Tee

176 3way Outlet Tee Key Clamp

3 way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames.

  • From £2.94 Ex VAT
201 Slope Range Short Tee

201 Slope Range Short Tee Key Clamp

An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails or the mid/lower rails to an end vertical. This fitting cannot be used to joint tubes in the short tee. For this the Key Clamp fitting 204 long tee should be used.

  • From £3.22 Ex VAT
135 Retro Fit Tee

135 Retro Fit Clamp On Tee Inline Key Clamp

Inline Add on Tee. Used for making additions to, upgrading or modifying an existing structure without having having the need to dismantle part or all of that structure.

  • From £3.33 Ex VAT
204 Slope Range Long Tee

204 Slope Range Long Tee Key Clamp

An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails. This fitting can be used to joint tubes in the long tee.

  • From £3.93 Ex VAT
136 Clamp on Tee

136 Clamp on Tee Key Clamp

Clamp on Tee. Used for making additions to, upgrading or modifying an existing structure without having having the need to dismantle part or all of that structure. Type 135 is a similar clamp-on fitting. The through tube (horizontal in photo) cannot be joined within the fitting.

  • From £5.30 Ex VAT
253 Slope (11°- 29°) Short Tee Key Clamp

253 Slope (11°- 29°) Short Tee Key Clamp

An adjustable tee connection between two tubes. Used on staircases (11°- 29°) and larger gradient guardrail between verticals and top rails or the mid/lower rails to an end vertical. This fitting cannot be used to joint tubes in the short tee. For this the Key Clamp fitting 255 long tee should be used.

  • £5.94 Ex VAT
255 Slope (11°- 29°) Long Tee Key Clamp

255 Slope (11°- 29°) Long Tee Key Clamp

An adjustable tee connection between two tubes. Used on staircases (11°- 29°) and larger gradient guardrail between verticals and top rails. This fitting can be used to joint tubes in the long tee.

  • £6.94 Ex VAT
Close

1 item(s) added to your compare list